Config Menu - Canon LBP-2000 User Manual

CONFIG MENU

JAM RECOVERY
7
AUTOCONT
7-22 CONFIG MENU
ON, OFF
This setting enables printing to resume automatically once a paper jam has been
removed. JAM RECOVERY can be set for PCL and PostScript personalities.
OFF
The printer does not resume printing automatically after the paper jam has been
removed. You must start the print again. You may want to use this setting to
conserve memory.
ON
The printer reserves enough memory to hold the data for the page that jams and
automatically reprints the page that jammed. With this setting, printing speed is
slightly slower. Use this setting if there is sufficient memory available.
ON, OFF
AUTOCONT (automatic continue) determines how the printer reacts to errors. If
the printer is part of a network or remote spooling system, then set
AUTOCONT=ON.
ON
The printer displays a message, goes off-line for about 10 seconds and then
automatically goes back on-line and resumes printing.
OFF
The printer displays a message, goes off-line and waits for you to correct the
problem. Press Go to resume operation.