Testing The Postscript Installation; Checking The Menus - Canon LBP-2000 User Manual

Testing the PostScript Installation

The Adobe PostScript 3 personality is available as an option for the printer. The
descriptions in this section assume that you have already purchased and installed
the optional Canon Adobe PostScript 3 Module A-65 for Adobe PostScript 3
printing.
For more information about how to install the Canon Adobe PostScript 3 Module A-
65 on the printer, see the instructions in the Setup Guide.

Checking the Menus

After installing the PostScript module, follow the procedure below to check that you
5
can now display and select items from PS MENU.
Go
1
2
Menu
5-2

Testing the PostScript Installation

Press [Go] to take the printer off-line.
The On Line indicator should go off. <PAUSED> will appear in the display.
Press [Menu] to display each of the menus listed below to
check their settings.
- The PS MENU is now enabled and ready to use.
- The PERSONALITY item under the PARALLEL MENU, USB MENU and the
ETHERNET MENU is now ready to use.
- Under the TEST MENU, you can now select and print the PS Font List.