Setting Up The Postscript Printing Environment; Printing The Ps Font List - Canon LBP-2000 User Manual

4
Value
5
Enter/Cancel
Go
6

Setting Up the PostScript Printing Environment

After you have installed the optional PostScript module and tested the PostScript
personality, you can use the enabled menus and menu items to set up your
PostScript printing environment.

Printing the PS Font List

5
Before you try to print the font list, follow the procedure to dedicate the printer to the
PostScript personality (See "Dedicating the Printer to the PostScript Language," on
p.5-3).
Follow the procedure below to print the PS Font List. Samples and a description of
what each page contains are provided on the following pages.
Go
1
2
Menu
3
Item
4
Enter/Cancel
5-4 Setting PostScript Printing Options
Press [Value] until you see <PERSONALITY=PS> (PostScript).
To select PS, press [Enter].
Press [Go] to bring the printer back on-line.
The printer is now dedicated to the PostScript personality.
Press [Go] to take the printer off-line.
The On Line indicator should go off. <PAUSED> will appear in the display.
Press [Menu] until you see <TEST MENU> in the top line.
Press [Item] until you see <PRINT PS FONTS> in the bottom
line.
Press [Enter] to start printing the font list.
It may take a few minutes for the font list to print.