Canon LBP-2000 User Manual page 121

DENSITY
0-7-15
This setting refers to the relative darkness of print on the paper.
For a darker setting, select a higher number. A darker setting consumes more
toner.
For a lighter setting, select a lower number. A lighter setting consumes less toner.
7
Standard density setting.
0 to 15
Press [Value] to move to a higher number. Press and hold to scroll through the
settings quickly.
Press [Shift] and [Value] to move to a lower number. Press and hold to scroll back
through the settings quickly. If the buffer is large, the printer will be able to
smoothly handle all data sent from the computer.
PWRSAV
3MIN, 15MIN, 30MIN, 1HR, 2HR, 3HR, 4HR
PWRSAV (Power Save) enables you to set the amount of time the printer sits idle
at full power before the fuser unit shuts down. This feature reduces power
consumption when the printer is not being used. for a long period. The printer will
start warming up again as soon as you send a print job to the printer, press one of
the keys on the control panel, open the front cover, or remove a paper cassette.
3MIN
The printer enters the power saving mode after the printer remains idle for three
minutes.
15MIN
The printer enters the power saving mode after the printer remains idle for 15
minutes.
30MIN
The printer enters the power saving mode after the printer remains idle for 30
minutes.
CONFIG MENU 7-23
7