Turning Off The Printer; If The Printer Is Not Using A Hard Disk - Canon LBP-2000 User Manual

IMPORTANT
See "Printer Trouble," on p.9-4 if the printer does not operate normally or an error
message is shown.

Turning Off the Printer

The printer should be turned off as described in the following procedure. The
procedure for turning off the power differs depending on whether or not the optional
hard disk has been installed.
IMPORTANT
If the printer has the optional hard disk installed, turning off the power should follow the
designated procedure to protect the hard disk.(See "If the Printer is Using a Hard Disk,"
on p.2-4)
If the printer is connected to a network, make sure that the printer is not printing data
from another personal computer before turning off the power.
If the power is turned off while the job indicator is on, the print data remaining in the
memory of the printer and the print data being spooled in the hard disk are erased. Wait
for the necessary print data to be printed and turn off the power after printing has been
completed. (See "Cancelling a Print Job," on p.2-8)
Do not turn off the power to the printer while it is printing.
Do not turn off the power to the printer during the self-diagnostic test performed
immediately after the power has been turned on.
If the printer has a hard disk installed, make sure that the HD indicator (green) is not on.
If the power is turned off while the HD indicator is on (the hard disk is reading or writing
data), the hard disk may be damaged and become unusable.
If the message <Flash Memory/Initializing> or <Flash Memory/Deleting > is displayed,
make sure that the message has been cancelled before turning off the power.

If the Printer is Not Using a Hard Disk

If the hard disk has not been installed on the printer, turn off the power as described
in the following procedure.
1
Make sure that the job indicator is off
On Line Job Alarm HD
Turning the Printer On/Off
2
2-3