Problems and Solutions Without Messages
Use the following procedures to solve problems that do not cause the printer to
display a message.
IMPORTANT
Refer to "Responding to Error Codes and Messages" (See p.9-18) when messages are
displayed.
If symptoms not specified in this section occur, a problem persists even after following
these procedures, or the cause cannot be figured out at all, contact your local supplier.
Printer Trouble
Indicators off and display blank.
Cause1
Remedy : Check the power switch to ensure the printer is turned on.
Cause2
Remedy : Check the power cord and be sure it is connected at both ends.
Cause3
9
Remedy : Check the AC outlet. Consult an electrician or the local power company. If you
Printing does not start.
Cause1
Remedy : Press [Go] to bring the printer on-line.
Reference : "About On-line and Off-line" (See p.2-6)
9-4
Problems and Solutions Without Messages
: Power switch is not turned on.
: Power cord is not connected.
: No power at the AC outlet.
are using a power strip, ensure power lead is connected at the source and
turned on.
: The printer is off-line.