Canon LBP-2000 User Manual page 61

A different message <CASSETTE2> may appear if an optional Canon Paper
Feed Unit PF-65 is installed.
4
Value
Press [Value] until you see <MPT>.
5
Enter/Cancel
Press [Enter].
6
Item
Press [Item] until you see <TRAY SWITCH> to make sure it is
on. If it is not, press Value until you see ON and press [Enter].
7
Item
Press [Item] until you see <MPT SIZE=> in the top line.
For manual feed, you have to set the paper size for the tray because the tray has
no paper size sensor.
8
Value
Press [Value] until you see the paper size you want. Then
press [Enter].
Go
9
Press [Go] to bring the printer back on-line.
10
Open the tray and load one sheet of letterhead with the print
side face-down and the top of the page inserted into the
printer.
11
Start to print with the software application.
12
The printer will take the first sheet from the tray and will
automatically feed remaining sheets from the standard paper
cassette.
13
Close the multi-purpose tray.
If you frequently print letters on letterhead paper, you may want to leave the
printer in this setting. The printer will always check the multi-purpose tray first. If
no paper is loaded, the printer will then select the standard paper cassette.
Printing from the Multi-Purpose Tray
3
3-23