Canon LBP-2000 User Manual page 245

Factory Default
Fixed Spacing
Flash ROM
Font
Font List
Form Feed
10
Free RAM
Fuser Assembly
Graphic
10-50 Glossary
A value programmed into the printer's memory at the factory before shipping. The
value is permanently stored in ROM (read only memory) and cannot be modified by
the user. Unless you change the settings, factory default settings are enabled every
time you turn the printer on. See also default.
Used in a fixed font where all the characters are of the same width. Fixed spacing is
also referred to as pitch and is measured in characters per inch.
Additional memory that is used to store font and macro data. Use of additional Flash
ROM memory requires the purchase and installation of the Canon Flash ROM
Module FR-65.
A complete set of characters of the same size and style; all the letters, numbers,
punctuation marks and symbols have a similar appearance.
Lists all the fonts currently available in the printer. Available PCL fonts and PostScript
fonts are listed separately.
A printer command that stops printing on a page and ejects the page from the printer.
If this command is not sent from the host computer at page end, unprinted data may
remain in the printer. If a print job is completed and the On Line indicator continues to
blink, there is unprinted data in the print. Press Shift and Go to print all the data
remaining in the printer.
The total amount of RAM currently available in the printer for downloading fonts from
the host computer, registering overlay forms, etc.
Fixes the toner onto the paper or other media with heat and pressure. Located inside
the printer, the fuser assembly reaches temperatures of 195°C (413°F) during
operation.
A drawing or diagram created with a graphics application program.