Canon LBP-2000 User Manual page 199

The Configuration Page shown here is for a printer with the optional network card
(Canon Ethernet Board EB-65), hard disk (Canon Hard Disk HD-65), PS module
(Canon Adobe PostScript 3 Module A-65), Flash ROM (Canon Flash ROM Module
FR-65), and additional RAM memory installed.
1 1 1 1 TEST MENU
Displays the test menu options. (See "TEST MENU," on p.7-10)
PCL MENU
2 2 2 2
Shows the PCL print job settings, as determined by the PCL MENU options. (See
"PCL MENU," on p.7-12)
3 3 3 3 PS MENU (Only displayed if the optional Canon Adobe PostScript 3 Module A-
65 is installed)
Displays the PostScript print job settings, as determined by the PS MENU options.
(See "PS MENU," on p.7-17)
FEEDER MENU
4 4 4 4
Displays the settings for the paper feed options for the printer, as determined by the
FEEDER MENU options. (See "FEEDER MENU," on p.7-19)
CONFIG MENU
5 5 5 5
Displays the printer configuration as determined by the CONFIG MENU options.
(See "CONFIG MENU," on p.7-22)
SHUTDOWN MENU
6 6 6 6
Displays the menu option used to shutdown the printer, before turning it off. (See
"SHUTDOWN MENU," on p.7-8)
PARALLEL MENU
7 7 7 7
Displays the parallel interface settings, as determined by the PARALLEL MENU
options. If the optional PostScript module is installed, you will see the settings for
10
automatic personality switching on the parallel port. (See "PARALLEL MENU," on
p.7-28)
8 8 8 8 USB MENU
Displays the USB interface settings, as determined by the USB MENU options. If
the optional PostScript module is installed, you will see the settings for automatic
personality switching on the USB port. (See "USB MENU," on p.7-30)
ETHERNET MENU (Only displayed if the optional Canon Ethernet Board EB-65
9 9 9 9
is installed.)
Displays the Ethernet interface settings, as determined by the ETHERNET MENU
options. If the optional PostScript module is installed, you will see the settings for
automatic personality switching on the network card. (See "ETHERNET MENU," on
p.7-32)
10-4 Checking the Printer Operation