If The Printer Is Using A Hard Disk - Canon LBP-2000 User Manual

2
2

If the Printer is Using a Hard Disk

If the hard disk has been installed on the printer, turn off the power as described in
the following procedure.
IMPORTANT
If you shut down the printer when there is an aborted job or a secure print job on the hard
disk, the message <JOB IN PROGRESS +CANCEL/-CONT.> is displayed. All of the jobs
will be cancelled by conducting a shut down.
Once the shut down procedure has been selected, you cannot cancel the operation. If
you need to turn the printer on again, first turn off the power according to the messages,
then turn the printer on again.
1
2
Go
2-4 Turning the Printer On/Off
Press the " " side of the power switch on the left side of the
printer.
The power is turned off.
Make sure that the Job indicator and HD indicator (green) are
off.
On Line Job Alarm
Press [Go] to turn off the On Line indicator.
The printer gets ready for settings to be entered from the control panel.
HD