Canon LBP-2000 User Manual page 178

Laser beam printer
Hide thumbs Also See for LBP-2000:
Table of Contents

Advertisement

Never touch the high-voltage contact points inside the front cover. This could damage the
printer.
Remove the jammed paper with the power to the printer still on. If you turn the power off,
the data being printing will be erased.
When you have opened the front cover, take care not to touch the transfer roller located
inside the cover and discharger.
Do not touch the drum when removing paper.
If you attempt to remove the jammed paper forcibly, the paper may be torn or the inside
device may be damaged. Pull out the jammed paper in the correct direction according to
the location at which the paper is jammed.
When the jammed paper has torn, find the scraps pieces of the paper remaining inside
the printer to remove them.
1
9
2
9-10
Clearing Paper Jams
Check all the messages appearing on the display.
Check all the messages appearing on the display.
The error messages and the locations are shown one by one on the display.
Check all of them. The messages will disappear when you open front the covers.
It is recommended to note down the messages.
CAUTION
The message indicates the location at which a paper jam has occurred.
The following types of messages are shown on the display. When two or
more messages appear on the display, note down all of them and check
them one by one in sequence.
Display message
<PAPER JAM>
<CHECK OUTPUT AREA>
<CHECK INPUT AREA>
Grasp the tabs on either side of the multi-purpose tray and
slowly pull it open.
In the paper was fed from the multi-purpose tray, proceed to the next step
Location of a paper jam
Front cover area
Paper delivery area
Paper feed area
Checking sequence
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents