Other Print Problems; Correcting Poor Print Quality - Canon LBP-2000 User Manual

Other Print Problems

Correcting Poor Print Quality

Printed text faded or streaked with white.
Cause
Remedy : Remove the cartridge, rock it gently 5 or 6 times and try to print again. If this
Reference : "Replacing the Toner Cartridge" (See p.8-2)
Printed pages are dirty or have white specks.
Cause1
Remedy : Clean the fixing assembly inside the printer.
Reference : "Cleaning the Fixing Roller" (See p.8-23)
Cause2
9
Remedy : Clean the transfer guide area with a clean cloth. If the problem persists, repeat
Reference : "Cleaning the Paper Feed Roller and Separation Pad" (See p.8-25)
Text is too light or too dark.
Cause1
Remedy : Adjust the print density.
Reference : "Adjusting the Print Density" (See p.8-18)
Cause2
Remedy : Set Economy Mode to OFF in CONFIG MENU.
Reference : "CONFIG MENU" (See p.7-22)
9-26

Other Print Problems

: The level of toner remaining in the toner cartridge may be low, or the toner is not
evenly distributed inside the cartridge.
does not solve the problem, replace the toner cartridge. Even if this solves the
problem, you should have a new toner cartridge on hand to replace the old
cartridge when it runs out of toner.
: The fixing roller inside the fixing assembly has become dirty with toner dust.
: The inside of the printer has become dirty with toner residue.
the cleaning procedure above a few times.
: The printed image on your page is too light or too dark.
: Economy Mode is selected in CONFIG MENU.