Cleaning The Printer - Canon LBP-2000 User Manual

Cleaning the Printer

Follow the instructions below to regularly clean the printer, so it remains in top
operating condition and continues to deliver high quality performance.
WARNING
Turn off the power switch and disconnect the power cord to clean the printer,
not doing so may cause fire or electrical shock.
Never use flammable solvent such as alcohol, benzene and thinner for cleaning.
If flammable solvent adheres to electrical parts inside the main unit of the
printer, this may result in fire or electrical shocks.
IMPORTANT
Never use any cleaning solvent other than water or water-diluted neutral detergent to
prevent deterioration of or cracks in the plastic parts of the main unit of the printer.
Be sure to dilute neutral detergent with water.
Never attempt to lubricate the front cover, cassette protective cover or mechanism inside
the main unit of the printer. The printer does not require lubrication.
1
8
8-20

Cleaning the Printer

Press the " " side of the power switch to turn off the printer.
Disconnect the power cord from the AC outlet.
IMPORTANT
Before turning the power off, make sure that there is no data being printed.
If you are using the hard disk, follow the steps for the procedure described in
"Turning the Printer On/Off" (See p.2-2).