Going Off-Line For Menu Display And Item Selection; Making A Selection From A Menu - Canon LBP-2000 User Manual

Going Off-line for Menu Display and Item Selection

Press [Go] to switch the On Line indicator on and off. When the On Line indicator is
on, the printer is on-line and ready to print. The printer must be on-line to receive
data from the host computer.
Every time you start a print job, check the On Line indicator to ensure it is on. If you
press other buttons on the printer control panel while the printer is on-line, the
printer will beep to warn you that these buttons are presently disabled.
When the On Line indicator is off, the printer is off-line. The printer must be off-line
before you can use the [Menu], [Item], and [Value] buttons.

Making a Selection from a Menu

4
Follow this example procedure to familiarize yourself with how to use the printer
control panel buttons to view or change menu settings. The example below shows
you how to view or change the density setting.
1
Go
2
3
Menu
4
Item
4-4 Quick Tour of the Printing Environment
Check the control panel to ensure that the Job indicator is off.
Press [Go] to take the printer off-line.
The On Line indicator goes off and <PAUSED> is displayed in the top line.
Press [Menu] until you see CONFIG MENU in the top line.
CONFIG MENU
Press [Item] to open the CONFIG MENU and display the first
item in the menu.
<JAM RECOVERY=OFF> is displayed in the bottom line of the LCD display.