Responding To Error Codes And Messages - Canon LBP-2000 User Manual

Responding to Error Codes and Messages

If printing is disabled during a print job for some reason, a buzzer will sound, the
alarm indicator will light up and an error code(s) will appear on the display. In
addition, for any phenomenon that does not affect printing function of the printer but
requires some measure to be taken, a warning message will appear on the display.
When any of these messages appear on the display, follow one of the remedies
listed to respond to the message.
NOTE
When two or more problems that are indicated by warning messages occur
simultaneously, the corresponding messages will appear alternately.
When two or more error messages appear on the display simultaneously, warning
messages will not appear there.
For messages attached with <Error Skip>, the printer will be able to continue printing by
"skipping errors" when you press [Go]. It should be remembered, however, that some
pieces of print data may be omitted or may not be printed correctly. If you want to stop the
procedure, perform software reset and remove the cause. Then press [Go] to start
printing again.
FLASH OVERFLOW
Cause1
Remedy : Format the Flash ROM or delete font and macro data to create more space.
9
Cause2
Remedy : Press [Go] to bring the printer back on-line.
FLASH ERROR
Cause
Remedy : Replace the Flash ROM.
9-18

Responding to Error Codes and Messages

: A memory overflow has occurred in the optional Flash ROM.
: The printer has received more font and macro data than it can hold in the
available memory of the Flash ROM. The printer goes off-line.
: An error has occurred when trying to format, or read or write data to the optional
Flash ROM.