Directed DBALL2 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Remote Starter
  5. Xpresskit DBALL2
  6. Installation manual

Directed DBALL2 Installation Manual

Chrysler remote start ready (rsr)
Hide thumbs Also See for DBALL2:
Table of Contents

Advertisement

Quick Links

Platform: DBALL2
Firmware: CHRYSLER Remote Start Ready (RSR) Installation
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.

Installation Guide

The CHRYSLER firmware for DBALL2 is an all-in-one door lock and override module compatible with
specific Chrysler, Dodge, Jeep, Mitsubishi and Volkswagen vehicles. This guide supports the
installation of a DBALL2 in Remote Start Ready (RSR) mode with or without a Plug & Play
(CHTHD1/THCHD1 or CHTHD2/THCHD2) T-Harness (optional). This solution offers three (3)
configuration options to control your system: 3x OEM Lock Remote Start Activation, RF System or
SmartStart (all sold separately).
This module can only be flashed and configured using XpressVIP at www.directechs.com or
using the Directechs Mobile application for smartphones. Refer to the Module Programming
section on pages 25-26 for more information.
Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle
completely on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to
start the vehicle from a distance.
Important!
This product is NOT compatible with vehicles equipped with a manual transmission.
Index
Vehicle Application Guide......................................................................................................................................................................
Installation (Wiring Diagrams & Vehicle Wiring Reference Charts)
Type 1 - with CHTHD1 (R1-R7) /THCHD1 (R1) T-Harness............................................................................................
Type 1 - without T-Harness.............................................................................................................................................
Type 2 - with CHTHD1 (R1-R7) /THCHD1 (R1) T-Harness............................................................................................
Type 2 - without Tharness...............................................................................................................................................
Type 3 - with CHTHD1 (R1-R7) /THCHD1 (R1) T-Harness............................................................................................
Type 3 - without T-Harness.............................................................................................................................................
Type 4 - with CHTHD1 (R1-R7) /THCHD1 (R1) T-Harness............................................................................................
Type 4 - without T-Harness.............................................................................................................................................
Type 5 - with CHTHD2 (R9-R10) /THCHD2 (R1) T-Harness..........................................................................................
Type 5 - without T-Harness.............................................................................................................................................
Type 6 - with CHTHD2 (R9-R10) /THCHD2 (R1) T-Harness.........................................................................................
Type 6 - without T-Harness.............................................................................................................................................
Type 7...............................................................................................................................................................................
SmartStart/XL202 Installation Notes.....................................................................................................................................................
Programming
Module Programming for Installation (with Factory Keyless)...............................................................................................................
Module Programming for Installation (without Factory Keyless)..........................................................................................................
Module Reset........................................................................................................................................................................................
Hard Reset............................................................................................................................................................................................
Feature & Option List............................................................................................................................................................................
Feature Programming...........................................................................................................................................................................
LED Diagnostics & Troubleshooting.....................................................................................................................................................
....................................................................................................................................................
Limited One-Year Consumer Warranty..................................................................................................................................................
Quick Reference Guide.........................................................................................................................................................................
SmartStart is equipped with D2D, which means it can be connected to an interface module and used in Remote
Start Ready (RSR) mode without the use of a remote starter. See the Module Programming section for more
information.
® Chrysler, Dodge, Jeep, Mitsubishi and Volkswagen are registered trademarks and property of their respective companies.
Rev.: 20170214
02
03
04
06
07
09
10
12
13
15
16
19
20
22
24
25
26
27
27
28
29
30
32
33
34
© 2017 Directed. All rights reserved.

Advertisement

Table of Contents
loading

Related Manuals for Directed DBALL2

Summary of Contents for Directed DBALL2

  • Page 1: Table Of Contents

    The CHRYSLER firmware for DBALL2 is an all-in-one door lock and override module compatible with specific Chrysler, Dodge, Jeep, Mitsubishi and Volkswagen vehicles. This guide supports the installation of a DBALL2 in Remote Start Ready (RSR) mode with or without a Plug & Play (CHTHD1/THCHD1 or CHTHD2/THCHD2) T-Harness (optional). This solution offers three (3) configuration options to control your system: 3x OEM Lock Remote Start Activation, RF System or SmartStart (all sold separately).

  • Page 2: Vehicle Application Guide

    (+) Starter wire (+) Starter wire at pin 4 at the ignition switch of the ignition switch 5 or 6 5 or 6 Connector side view at ignition switch Connector side view at ignition switch © 2017 Directed. All rights reserved.
  • Page 3 (Vehicle side) (harness side) Ignition Barrel Connected to the Dodge Journey only. DO NOT connect Parking Light Input to (+)12V at the ignition switch. All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 4 (-) Driver Door Trigger: Violet Connected to the Dodge Journey only. DO NOT connect Parking Light Input to (+)12V at the ignition switch. All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 5 Black Lt.Blue/Red Wireless Ignition Node on ignition switch. Black Ground Black or Black/Striped Wireless Ignition Node on ignition switch. Black Parking Lights White/Brown Headlight switch. Black Driver Door Trigger Violet Drivers kick door harness. © 2017 Directed. All rights reserved.

  • Page 6: Type 2 - With Chthd1 (R1-R7) /Thchd1 (R1) T-Harness

    (-) Driver Door Trigger: Violet CHTHD1 (R1-R7) / THCHD1 (R1) (optional) 12-pin Connector 12-pin Connector 12-pin Connector (harness side) (Vehicle side) (harness side) Ignition Barrel All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 7 RFTD OR a SmartStart module. Driver Refer to the SmartStart/XL202 Kick Installation Notes for more information. Headlight switch Panel (black 6-pin conn.) (-) Driver Door Trigger: Violet All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 8 W ireless Ignition Node on ignition switch. Black Ground Black or Black/Striped W ireless Ignition Node on ignition switch. Black Parking Lights W hite/Green Headlight switch. Black Driver Door Trigger Violet Drivers kick door harness. © 2017 Directed. All rights reserved.

  • Page 9: Type 3 - With Chthd1 (R1-R7) /Thchd1 (R1) T-Harness

    Installation Notes for more information. Trigger: Violet CHTHD1 (R1-R7) / THCHD1 (R1) (optional) 12-pin Connector 12-pin Connector 12-pin Connector (harness side) Ignition (Vehicle side) (harness side) Barrel All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.

  • Page 10: Type 3 - Without T-Harness

    RFTD OR a SmartStart module. Refer to the SmartStart/XL202 (-) Driver Door Installation Notes for more information. Trigger: Violet Ignition Barrel Ignition Switch (connector side view) All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 11 Twisted pair at steering column or behind radio. White/Gray, White or FT CAN Low Data Twisted pair at steering column or behind radio. White/Pink Driver Door Trigger Violet Instrument cluster or driver kick. White © 2017 Directed. All rights reserved.
  • Page 12 (brown 20-pin conn.) CHTHD1 (R1-R7) / THCHD1 (R1) (optional) 12-pin Connector 12-pin Connector 12-pin Connector (harness side) Ignition (Vehicle side) (harness side) Barrel All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.

  • Page 13: Type 4 - Without T-Harness

    Barrel 2 3 4 6 7 8 12 13 14 18 19 Driver Door Module Ignition Switch (brown 20-pin conn.) (connector side view) All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 14 White/Orange Data Twisted pair at steering column or behind radio. White/Gray, White or FT CAN Low Data Twisted pair at steering column or behind radio. White/Pink Driver Door Trigger Violet Driver Door Module. Brown © 2017 Directed. All rights reserved.
  • Page 15 8-pin Connector at ignition switch at ignition switch (harness side) (harness side) (Vehicle side) (Vehicle side) With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 16 RFTD OR a SmartStart module. pin 4 Refer to the SmartStart/XL202 Installation Notes for more information. With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 17 Black HS CAN Low Orange Data OBDII diagnostic connector. Black Parking Lights White/Violet Driver kick panel. Parking Light Relay power Battery or TIPM on passenger fender. Driver Door Trigger Violet Under driver dash. Lt.Gray © 2017 Directed. All rights reserved.
  • Page 18 Sentry Key Module near ignition switch. Black Parking Lights White/Violet Driver kick panel. Parking Light Relay Power Connector above drivers kick panel. White Driver Door Trigger Violet Under drivers dash above kick panel. Black © 2017 Directed. All rights reserved.
  • Page 19 Ignition Switch Violet/Brown T-04 loop found on the T-Harness. 8-pin Connector at ignition switch (Vehicle side) 8-pin Connector 8-pin Connector (harness side) (harness side) All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.

  • Page 20: Type 6 - Without T-Harness

    Installation Notes for more information. (+) 12V: Red or Sentry Key Module Red/Striped, (black 8-pin conn.) pin 5 (-) Ground: Black or Black/Striped, pin 4 All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 21 Sentry Key Module near ignition switch. Black Parking Lights White/Violet Passenger kick panel harness to rear of vehicle. Driver Door Trigger Violet Driver kick, door harness. Parking Lights Relay power Battery or under hood TIPM. © 2017 Directed. All rights reserved.
  • Page 22 You can connect to either a XL202 (connector side view) Black/Striped, RFTD OR a SmartStart module. pin 4 Refer to the SmartStart/XL202 Installation Notes for more information. All connectors are displayed from the wire side (unless specified otherwise). © 2017 Directed. All rights reserved.
  • Page 23 Pink/Green Ignition switch. Black 5 or 6 Starter Pink/Orange Ignition switch. Black 5 or 6 Hazards White/Dk. Blue SCM (Steering Column module) in steering column. Parking Lights Relay Power Top connector above fuses. Black © 2017 Directed. All rights reserved.

  • Page 24: Smartstart/Xl202 Installation Notes

    Button 1. Use the D2D Crossover (XOVER) cable that is provided with XL202, and NOT the one in the DBALL2 package. 2. The modules must be connected in a specific order. Refer to the Module Programming section for more information.
  • Page 25 When the flashing operation is successful, you can proceed with the programming instructions below. SmartStart Installation The DBALL2 module must be disconnected from any power source before SmartStart can be connected to it. Failing to do so could damage DBALL2.
  • Page 26 (Refer to the previous page for programming instructions WITH factory keyless). Connect the 10-pin, 12-pin and 14-pin harnesses to & DBALL2, then wait until the LED turns ON solid red. Solid Insert the key into the ignition barrel and turn it to the ON position.

  • Page 27: Module Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds & until the LED starts to flash orange and red. Solid Flashes & Release the programming button. The LED turns ON solid red. Release Solid © 2017 Directed. All rights reserved.

  • Page 28: Feature & Option List

    A remote starter, for which the Safelock feature is active, will work perfectly with this option and will make it invisible to the user. © 2017 Directed. All rights reserved.

  • Page 29: Feature Programming

    Press the lock/arm or unlock/disarm button on aftermarket transmitter to change the option of the selected feature. When installing the DBALL2 in RSR using 3x OEM Lock Remote Start Activation only, there is no aftermarket transmitter on which to press lock/unlock to change the options of the selected feature.

  • Page 30: Led Diagnostics & Troubleshooting

    The Violet/Green or Violet/Brown wire did not detect the expected voltage value. Refer to "Installation (wiring Flashes red MUX not detected. diagrams & vehicle wiring reference charts)" to check the connections. © 2017 Directed. All rights reserved.
  • Page 31 Refer to feature when RFTD feature is disabled. programing section for more information. An RSR feature file mismatch was detected. Please Flashes red Feature error. contact Technical Support. © 2017 Directed. All rights reserved.

  • Page 32: Parking Light Error Codes

    Brake shutdown. Hood shutdown/Remote start safety override switch is ON*. Remote start safety override switch is ON*. * If the vehicle hood status is supported through data, safety override switch input will report 7 flashes. © 2017 Directed. All rights reserved.

  • Page 33: Limited One-Year Consumer Warranty

    Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete...

  • Page 34: Quick Reference Guide

    Quick Reference Guide DBALL2-CHRYSLER Remote Start Ready (RSR) Installation Vehicle Takeover Pit Stop Mode The Pit Stop Mode feature is practical when you need to stop and run an errand, but wish to keep the engine running. Press Press the remote start button on the transmitter to remote start start the vehicle.*...
  • Page 35 Quick Reference Guide DBALL2-CHRYSLER Remote Start Ready (RSR) Installation Parking Light Error Codes List of Available Commands The parking lights on your vehicle will flash a specific number of times 3 seconds Note that the information below is for Viper, Clifford and Python models. Icons and following an unscheduled shutdown or failure to start.

  • Page 36: Smartstart Compatible

    3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new level of 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet. For more information, visit www.mysmartstart.com.

This manual is also suitable for:

Xpresskit dball2

Table of Contents