Hino Motors J08E-VC Workshop Manual page 325

EN13–12 AIR COMPRESSOR (J08E: 340 cm3)
(3)
SAPH011061300022
4.
SAPH011061300023
5.
NOTICE
Assemble the various parts after applying engine oil to the sliding
parts.
(1)
NOTICE
Install the piston rings in order shown in the figure.
SAPH011061300024
Lock the nut with a lock washer.
MEASURE THE END PLAY OF THE CRANKSHAFT.
Assembly standard: 0-0.6 mm {0-0.0236 in.}
Limit: 1.0 mm {0.0394 in.}
ASSEMBLE THE PISTON.
When installing the piston rings on the piston, ensure that the piston
skirt is at the bottom, and use the special tool.
SST: Piston ring expander (S0944-01060)