Hino Motors J08E-VC Workshop Manual page 140

Clip
SAPH011060400037
Clamp
Connector
SAPH011060400038
Clip
Connector
SAPH011060400039
Clamp
SAPH011060400040
EXHAUST SYSTEM (J08E)
(7) Connect the DOC rear exhaust gas temperature sensor connector
and install the clip.
Connector
(8) Install the clamp of the harness connecting to the injector and the
injector connector.
(9) Install the DEF hose connecting to the injector.
NOTICE
Before reassembling, wash away crystallized DEF on the connector
with water.
(10) Install the coolant hose connecting to the injector.
EN04–19