Hino Motors J08E-VC Workshop Manual page 148

EXHAUST SYSTEM (J08E)
2. Forced regeneration
(1) Forced regeneration is done by the "Manual forced regeneration"
screen.
! CAUTION
•
Confirm safety of the surrounding area, then press DPR regener-
ation switch inside the cabin to execute the regeneration.
•
Confirm the PTO switch is OFF.
(2) When the "Regeneration switch ON identification" value is ON,
inspection of burner system and wash or replace the filter.
When the value is OFF, DPR functions normally.
EN04–27
SAPH011060400053