Hino Motors J08E-VC Workshop Manual page 161

EN04–40
.
EXHAUST SYSTEM (J08E)
4.
(1)
(2)
SAPH011060400072
YES
Perform soot cleaning to the DPR filter and then install it on the
vehicle.
Refer to "2. INSTALL THE DPR FILTER" on page EN04-35.
NOTICE
After the installation, regenerate the DPR cleaner manually and
recheck the differential pressure. Make sure it is within the
standard value and deliver the vehicle.
.
IN CASE THAT DPR AND BURNER DTC CODE IS DISPLAYED
Dismount the DPR filter from the vehicle.
Refer to "1. REMOVE THE DPR FILTER" on page EN04-34.
Inspect the status of the DPR filter rear surface.
Refer to "INSPECT INSIDE THE DPR FILTER" on page EN04-42.
Standard value: No soot escape
NO
Replace with a new DPR filter and install it on the
vehicle.
Refer to "2. INSTALL THE DPR FILTER" on
page EN04-35.
NOTICE
After the installation, regenerate the DPR filter
manually and recheck the differential pressure.
Make sure it is within the standard value and
deliver the vehicle.