Hino Motors J08E-VC Workshop Manual page 290

EN10–34 EMISSION CONTROL (J08E)
6.
(1)
SHTS011061000073
NOTICE
•
•
SHTS011061000074
(2)
ATOMIZED FUEL PIPE
IMPORTANT POINT - DISMOUNTING
a. Remove the clip.
b. Remove the pipe (use the wrench to avoid looseness of the base
connector).
After removal, be careful to avoid entry of foreign matter into the
removed pipe.
If rust is gathered around the nut on the front of the combustion
chamber, blow air before removal to avoid rust from getting into
the combustion chamber.
IMPORTANT POINT - MOUNTING
a. Installation is the reversal of the removal.
Tightening Torque:
6 Nm {62 kgfcm, 4.4 lbfft} (Fuel pipe clip)