Inspection By Way Of Hino-Dx - Hino Motors J08E-VC Workshop Manual

EN04–26 EXHAUST SYSTEM (J08E)

INSPECTION BY WAY OF HINO-DX

1. DPR status check
(1) Select the "DPR Reset confirmation" in the "Check function" menu of
HINO-DX.
(2) Confirm Data View of the "DPR status display" display (monitor), if the
value for all the items are "OFF", DPR functions normally.
Then "Manual forced regeneration" and "DPR differential pressure
check" can be done.
(3) In case "ON" is displayed in Data view of the "DPR status display" dis-
play (monitor), check according to the procedure on page EN04-32,
"DETERMINATION BY WAY OF DPR STATE DETERMINATION
MONITOR OF HINO-DX".
EN0110604H200005
SAPH011060400052