AJAX KeyPad Plus User Manual page 9

Settings
KeyPad Plus is con gured in the Ajax app:
1. Go to the Devices
2. Select KeyPad Plus from the list.
3. Go to Settings by clicking on the gear icon
To apply the settings after the change, click the Back button
Parameter
First eld
Room
Group Management
Access Settings
Keypad code
Duress code
tab.
.
Value
Device name. Displayed in the list of hub devices, SMS
text, and noti cations in the event feed.
To change the device name, click on the pencil icon
.
The name can contain up to 12 Cyrillic characters or up
to 24 Latin characters
Selecting the virtual room to which KeyPad Plus is
assigned. The name of the room is displayed in the
text of SMS and noti cations in the event feed
Selecting the security group controlled by the device.
You can select all groups or just one.
The eld is displayed when the
enabled
Selecting the method of arming/disarming:
Keypad code only
User passcode only
Keypad and user passcode
Selection of a common password for security control.
Contains 4 to 6 digits
Selecting a common duress code for silent alarm.
Contains 4 to 6 digits
Learn more
Group mode
is