AJAX KeyPad Plus User Manual page 17

Security management using Tag or Pass
1. Activate the keypad by swiping your hand over it. KeyPad Plus will beep (if enabled in
the settings) and turn on the backlight.
2. Bring Tag or Pass to the keypad pass/tag reader. It is marked with wave icons.
3. Press the Arm, Disarm, or Night mode button on the keypad.
Note that if Easy armed mode change
the Arm, Disarm, or Night mode button. The security mode will change to the opposite after tapping
Tag or Pass.
Mute Fire Alarm function
KeyPad Plus can mute an interconnected re alarm by pressing the Function button (if the
required setting is enabled). The reaction of the system to pressing a button depends on
the settings and the state of the system:
Interconnected FireProtect Alarms have already propagated — by the rst press of the
Button, all sirens of the re detectors are muted, except for those that registered the
alarm. Pressing the button again mutes the remaining detectors.
Interconnected alarms delay time lasts — by pressing the Function button, the siren of
the triggered FireProtect/FireProtect Plus detector is muted.
Keep in mind that the option is available only if
enabled.
Learn more
Indication
KeyPad Plus can report the current security mode, keystrokes, malfunctions, and its status
by LED indication and sound. The current security mode is displayed by the backlight after
the keypad is activated. The information about the current security mode is relevant even if
the arming mode is changed by another device: a key fob, another keypad, or an app.
is enabled in the KeyPad Plus settings, you do not need to press
Interconnected FireProtect Alarm is