Duress Code - AJAX KeyPad Plus User Manual

Learn more

Duress code

KeyPad Plus supports duress code. It allows you to simulate alarm deactivation. The
app and sirens installed at the facility will not give you away in this case, but the security
company and other users of the security system will be warned about the incident.
Learn more
Two-stage arming
KeyPad Plus can participate in two-stage arming, but cannot be used as a second-stage
device. The two-stage arming process using Tag or Pass is similar to arming using
personal or common password on the keypad.
Learn more
Event transmission to the monitoring station
The Ajax security system can connect to the CMS and transmit events and alarms to the
monitoring station of the security company in Sur-Gard (ContactID), SIA DC-09, and other
proprietary protocol formats. A complete list of supported protocols is available
device ID and the number of the loop (zone) can be found in
Connection
KeyPad Plus is incompatible with Hub, third-party security central units, and ocBridge Plus and
uartBridge integration modules.
Before starting connection
1. Install the Ajax app and
2. Ensure that the hub is on and has Internet access (via Ethernet cable, Wi-Fi, and/or
mobile network). This can be done by opening the Ajax app or by looking at the hub
logo on the faceplate — it lights white or green if the hub is connected to the network.
3. Make sure that the hub is not in armed mode and does not start updates by checking
its status in the app.
create an account . Add a hub and create at least one room.
here
its states .
Ajax
. The