AJAX KeyPad Plus User Manual page 11

Pass/Tag Reading
Easy armed mode change/Assigned group easy
management
Alert with a siren if the panic button is pressed
Jeweller Signal Strength Test
Attenuation Test
Pass/Tag Reset
Temporary Deactivation
When enabled, the security mode can be controlled
with Pass and Tag access devices
When enabled, changing the security mode with Tag
and Pass does not require con rmation by pressing
the arm, disarm, or Night mode button. The security
mode is switched automatically.
The option is available if Pass/Tag Reading is enabled
in the keypad settings.
If the group mode is activated, the option is available
when the keypad is assigned to a particular group —
the Group Management eld in the keypad settings
Learn more
The eld is displayed if the Alarm option is selected for
the Function button.
When the option is enabled, the sirens connected to
the security system give an alert when the * button
(Function button) is pressed
Switches the keypad to the Jeweller signal strength
test mode
Learn more
Switches the keypad to the Attenuation test mode
Learn more
Allows deleting all hubs associated with Tag or Pass
from device memory
Learn more
Allows the user to disable the device without removing
it from the system. Two options are available:
Entirely — the device will not execute system
commands or participate in automation scenarios,
and the system will ignore device alarms and other
noti cations
Lid only — the system will only ignore noti cations
about the triggering of the device tamper button
Learn more about temporary deactivation
of devices