AJAX KeyPad Plus User Manual page 7

KeyPad Plus body status noti cations are temporarily disabled
Learn more
KeyPad Plus is temporarily deactivated
Learn more
Pass/Tag reading is enabled in KeyPad Plus settings
Pass/Tag reading is disabled in KeyPad Plus settings
States
The states include information about the device and its operating parameters. The states
of KeyPad Plus can be found in the Ajax app:
1. Go to the Devices
2. Select KeyPad Plus from the list.
Parameter
Malfunction
Temperature
Jeweller signal strength
Connection
Battery charge
tab.
Value
Pressing opens the KeyPad Plus malfunctions list.
The eld is displayed only if a malfunction is detected
Keypad temperature. It is measured on the processor
and changes gradually.
Acceptable error between the value in the app and the
room temperature: 2–4°C
Jeweller signal strength between the hub (or ReX range
extender) and the keypad.
Recommended values — 2-3 bars
Connection status between the hub or range extender
and the keypad:
Online — the keypad is online
O ine — no connection to the keypad
The battery charge level of the device. Two states are
available:
ОК