Table of Contents
Advertisement
Functionality testing
The Ajax security system provides several types of tests that help you make sure that
installation points of devices are selected correctly.
KeyPad Plus functionality tests do not start straight away but after no more than one hub-
detector ping period (36 seconds when using the standard hub settings). You can change
the ping period of devices in the Jeweller menu of the hub settings.
Tests are available in the device settings menu (Ajax App → Devices
Settings
)
Jeweller Signal Strength Test
Attenuation Test
Choosing a location
When holding KeyPad Plus in your hands or using it on a table, we cannot guarantee that the touch
buttons will work properly.
It is a good practice to install the keypad 1.3 to 1.5 meters above the oor for convenience.
Install the keypad on a at, vertical surface. This allows KeyPad Plus to be rmly attached
to the surface and to avoid false tamper triggering.
→ KeyPad Plus →
Advertisement
Table of Contents
Need help?
Do you have a question about the KeyPad Plus and is the answer not in the manual?
Questions and answers