Table of Contents
Advertisement
43
Video Out
Select the Video tab from the top, then click Video Out.
The Video Out page configures the display settings of live camera views on an external monitor connected to the NVR.
Normal Video Out
Video Out Selection: Select from the following options:
•
◦ Select None if no external monitor is connected to the NVR.
◦ Select Sequence to cycle through a full screen view of all connected cameras on an external monitor.
(See Sequence below)
◦ Select Static to display either a single, split, or quad view of specific cameras on an external monitor. (See Static below)
NOTE: These settings will have lower priority than Sensor Video Control (i.e. camera views configured to display on an external monitor
when a sensor input is triggered; see 'Sensor Settings' page for details).
Sequence
•
Preference: Use the drop-down menu to select the order you want each camera view to appear in the sequence.
•
Dwell Time: Enter the amount, between 1 to 10 sec, each camera view is displayed.
Click Save Changes to save changed entries.
ROADRECORDER® 9000 USER GUIDE
Advertisement
Table of Contents
