Table of Contents
Advertisement
23
Audio / Video
Select the Settings tab from the top, then click Audio / Video.
The Audio / Video page configures the cameras connected to the NVR.
NOTE: If configuring cameras connected to an external PoE switch, it is HIGHLY RECOMMENDED to assign a Static IP address to the
cameras prior to configuring settings here.
Camera Discovery
•
Discover All: Click the Discover All button to search for and discover all connected cameras. The 'Discovery Result' page will
display after search is complete. (See Discovery Result below).
•
Discover New: Click the Discover New button to discover new cameras after cameras have been added or replaced. The
'Discovery Result' page will display after search is complete. (See Discovery Result below).
•
Last Result: Click the Last Result button to display the results from the most recent Discover All or Discover New search
performed. The 'Discovery Result' page will display. (See Discovery Result below).
•
Add Credential: If using a newly released IP camera or a Non-Safety Vision IP camera that is ONVIF Profile S compliant,
users must add the credentials in order for the NVR to discover the camera. Click the Add Credential button, and enter the
username and password, then click the Add to List button.
•
Import/Export: Click the Import / Export button to either import or export the device configuration list and new credentials.
ROADRECORDER® 9000 USER GUIDE
Advertisement
Table of Contents
