Table of Contents
Advertisement
Network Settings
Select the Admin tab from the top, then click Network.
The Network Settings page configures the network interfaces and features.
MNVR Detail
•
MNVR Name: Enter the name of the NVR
Restrictions: Only alphanumeric characters are allowed
with a maximum length of 15 characters. Names with "_"
(underscore) are also accepted. No other special characters
can be used for NVR name.
•
Serial number: Enter the Serial Number of the MNVR.
LAN 2 Network Interface
•
IP address: Default IP address for LAN 2.
•
Netmask: Default Subnet mask for LAN 2.
•
Gateway: Default Gateway IP address for LAN 2.
Mail Server
If enabled, mail will be sent when an event is triggered.
If disabled, mail will not be sent on event.
ROADRECORDER® 9000 USER GUIDE
•
Server IP address: Enter the Mail Server IP address, which
will be used to send e-mails when an event is triggered
from the NVR
•
Username: Enter the username which will be used to log
in to the Mail Server.
•
Password: Enter the password which will be used to log in
to the Mail Server.
•
Port Number: Contact your IT administrator for Mail
Server Port Number.
•
Mail to: Enter the email address to which all emails will be
sent to when an event is triggered from the NVR.
•
Mail from: Enter the email address from which all emails
will be sent from when an event is triggered from the NVR.
16
Advertisement
Table of Contents
