Table of Contents
Advertisement
29
Recording
Select the Settings tab from the top, then click Recording.
The Recording page configures file sizes and how the NVR records events.
File Size
•
Continuous recording file size: Enter file size to be
created for continuous recording.
Restrictions: File size can be configured from 50 MB to
1024 MB. Decimal values not allowed.
•
Event recording file size: Enter file size to be created for
event-based recording.
Restrictions: File size can be configured from 50 MB to
1024 MB. Decimal values not allowed.
NOTE: Safety Vision strongly recommends retaining the
default settings of 100 MB.
Event Recorder Settings
•
Pre event recording: Select the amount of time (between
1 to 5 mins) that will be included in an event recording
before an event is triggered.
•
Post event recording: Select the amount of time (between
1 to 10 mins) that will be included in an event recording
after an event is triggered.
Enable Event Write Protection: Select this option to protect
event files from being overwritten from the storage device
when full.
ROADRECORDER® 9000 USER GUIDE
Snapshot
Cameras enabled for snapshots under the Audio / Video
Settings page, capture data at specified intervals.
Click Save Changes to save changed entries.
•
Capture interval: Enter the interval that snapshots are
taken.
Restrictions: Snapshot interval can be configured from 10 to
3600 sec. Decimal values are not allowed.
Advertisement
Table of Contents
