Part 2: Configuration; Connecting To The Nvr - Safety Vision RoadRecorder 9000 User Manual

11

PART 2: CONFIGURATION

The RoadRecorder 9000 NVR can be configured through the on-board web interface, which must be accessed with a
PC and web browser.

Connecting to the NVR

Use the following procedure to access the web-based configuration menus using the default IP address:
1. Connect the PC to the NVR's Ethernet LAN 1 RJ-45 port with a standard Ethernet cable.
Ensure the NVR and PC are receiving power and have started up.
2. Open the Internet Protocol (TCP/IP) Properties window for
the LAN connection you are using.
In Windows, open Network Connections. Right-click the LAN
connection and select Properties. In the list of items, select
Internet Protocol (TCP/IP) and click Properties.
3. Select the "Use the following IP address:" option.
4. Enter 182.168.1.80 in the IP address field.
5. Enter 255.255.0.0 in the Subnet mask field.
This field normally defaults to 255.255.255.0. Ensure the correct
255.255.0.0 subnet is entered.
Leave all other fields blank.
6. Click OK on the Internet Protocol (TCP/IP) Properties window
and then click OK on the Local Area Connection Properties
window.
Your PC's IP address and subnet mask are now configured.
7. Open a web browser (Internet Explorer or Google Chrome
preferred) and navigate to 182.168.1.200.
The Login screen appears.
8. Enter the username and password, then
click Login.
The configuration web interface launches.
The default username and password are
admin. If this has been changed, contact
your system administrator for your login
information.
ROADRECORDER® 9000 USER GUIDE