Table of Contents
Advertisement
15
Storage
Select the Admin tab from the top, then click Storage.
The Storage page allows you to configure the storage device(s) of the NVR.
Primary Storage
•
Primary Storage Media Device: Select "Removable SSD"
as the primary storage device.
•
Primary Storage Media Setup: Single Partition is selected
by default
•
Delete file option for primary storage: Select the option
for when the primary storage device begins to overwrite:
◦ Overwrite When Full: Once the primary storage
device reaches capacity, new recordings will begin to
overwrite the oldest data.
◦ Overwrite Max Time: This option deletes files with
timestamps older than the specified time. Enter the
amount of time in hour(s) in the "Delete files older
than" field. The timestamps of all files will be regularly
checked at an interval of 1 hour.
◦ No Overwrite (Stop When Full): Select this option to
prevent the primary storage device from overwriting.
Recording will be stopped once the primary storage
device reaches capacity.
Secondary Storage
•
Enable Safestor+: Select this option to enable Safestor
Plus. In case of Primary storage media failure, Firmware
will check if secondary storage is present in the NVR. If
secondary storage is present, then recording will be done
on secondary storage.
ROADRECORDER® 9000 USER GUIDE
Click Save Changes to save changed entries.
Format
Select a device, then click the Format button. The NVR
automatically reboots after formatting the device.
WARNING: Formatting a device erases all data, including
recorded video. Use with caution.
•
Secondary Storage Media: This field is auto populated
•
Delete file option for secondary storage: Select the
option for when the secondary storage device begins to
overwrite:
◦ Overwrite When Full: Once the secondary storage
device reaches capacity, new recordings will begin to
overwrite the oldest data
◦ Overwrite Max Time: This option deletes files with
timestamps older than the specified time. Enter the
amount of time in hour(s) in the "Delete files older
than" field. The timestamps of all files will be regularly
checked at an interval of 1 hour.
◦ No Overwrite (Stop When Full): Select this option
to prevent the secondary storage device from
overwriting. Recording will be stopped once
secondary storage device reaches capacity.
Advertisement
Table of Contents
