Table of Contents
Advertisement
35
Sensor Status
Select the Diagnostics tab from the top, then click Sensor / I/O.
The Sensor Status page provides visual assistance when installing or troubleshooting the NVR's sensors and the accessories
connected to the NVR.
Select a refresh interval (the frequency at which the web page will refresh) and the test duration (in minutes), then click Go.
•
MB Temperature: Shows the current temperature of the motherboard in Celsius.
•
Accelerometer: Shows the current 3-dimensional acceleration.
•
GPS: Shows the current GPRMC string received from any of the GPS sources.
•
Sensor 1 – Sensor 8: Shows sensor name and its current status. If voltage is applied to the sensor, it will show sensor as
'Active' otherwise it will display as 'Inactive'.
•
Ignition: Shows the current status of ignition as ON or OFF.
•
Relay 1 – Relay 4: Shows current status of Relay Out as ON or OFF.
•
Vehicle Power: Shows the current vehicle power in volts.
•
Internal UPS Voltage: Shows the NVR's current internal battery voltage in volts.
•
Internal UPS Percentage: Shows the NVR's current internal battery percentage.
ROADRECORDER® 9000 USER GUIDE
Advertisement
Table of Contents
