(GPS / GEO Fence cont.)
3. Click on the map to set the first point. Continue clicking to set points around the desired location (10 points max).
Connect the last point to the first point to complete the geo fence.
You can further adjust the size by clicking and dragging the image "handles". To delete and start over, click the Delete
Selected Shape button below the map.
4. Use the dropdown menus below the map for the geo fence created, and select either Entry or Exit, and the action that
occurs. Select Event to trigger an event, or SVAnnounce to ping the server.
NOTE: Safety Net Announce must be set to 'Geo fence' under the Startup & Shutdown settings page in order to select
SVAnnounce.
Click Save Changes to save changed entries.
ROADRECORDER® 9000 USER GUIDE
32