WiFi Status
Select the Diagnostics tab from the top, then click WiFi Status.
The WiFi Status page provides comprehensive support for technicians installing and troubleshooting the NVR's WiFi devices.
On page load, it shows Status of configured WiFi devices with WiFi SSID.
Connected Profile: Displays Connected Profile SSID, Signal Strength, Bit Rate, Frequency/Channel, MAC Address and IP Address.
Ping Test:
Enter and select the following information to perform a ping test:
•
IP Address: Enter IP address of the WiFi device for which you want to perform a ping test.
•
Packet Count: Possible value for packet count is 5, 10, 20 and 50.
Click the Start button to perform ping test. Packet loss for WiFi device will be displayed as a result.
ROADRECORDER® 9000 USER GUIDE
38