Table of Contents
Advertisement
17
(Network Settings cont.)
Wifi Interface
Select this option to enable the NVR's internal WLAN.
Click on View Wifi Configuration to launch the Wifi Configuration window. (See Wifi Configuration section below)
Wifi Configuration
The Wifi configuration window configures which Access Points the NVR will connect to.
Available Wireless Profiles: Click the Scan button, then click OK to perform a site survey of all Access Points available. All
available Access Points will be displayed.
Wifi Profile
Select the number of profiles, between 1 to 5, from the
dropdown menu that the NVR will connect to and enter the
following for each:
•
SSID: Click on the desired Wifi SSID from the scan results
to auto populate the SSID for the Wifi profile.
•
Username Required: Select this option if a username is
required to connect to the configured wifi profile.
•
Security Type: Select the security type from the
dropdown menu
•
Password: Enter the password if required for the wifi
profile.
•
Show Password: Select this option to display the
password.
•
Static: Select this option to configure a Static IP address.
ROADRECORDER® 9000 USER GUIDE
Click Save Changes to save wifi configuration.
Click on the 'x' icon located on the top right-hand corner of the
screen to exit the Wifi Configuration window and return to the
Network Settings page.
•
Static IP Address: Enter the Static IP address.
•
Netmask: Enter the Subnet Mask.
•
Gateway: Enter the Gateway IP address.
•
Delete: Select this option to clear all fields for the selected
wifi profile.
•
Wifi SSID: Displays the wifi profile the NVR is
connected to.
•
Wifi IP address: Displays the wifi profile IP address the
NVR is connected to.
Advertisement
Table of Contents
