Table of Contents
Advertisement
LCD Control Panel Operation
Main Menu
Press the center navigation key to display the Main Menu.
There are four options available: System Details, System Logs,
Manual Offload, Remove SSD, and Help.
Use the arrow navigation keys to navigate through the menus.
Press the center navigation key to confirm or enter a
command.
Use the ESC button to exit a menu or to cancel a command.
System Details
Firmware Version is the only available option.
•
Firmware Version: Select Firmware Version to display
the firmware version currently installed on the NVR. This
information may be useful when speaking with Safety
Vision Technical Support.
System Logs
Event Logs and Error Logs are the available options.
NOTE: System Logs are stored in the LCD Control Panel's internal
memory. Disconnecting the LCD Control Panel from the NVR will
result in the loss of data. (This data is still recorded by the NVR but
can no longer be displayed on the LCD).
•
Event Logs: Select Event Logs to display the most recent
recorded event timestamps. Use the up and down
navigation keys to scroll through the list of events.
•
Error Logs: Select Error Logs to display the most recent
errors that have occurred. The nature of the error and
the time it occurred are displayed. Use the up and down
navigation keys to scroll through the list of errors.
ROADRECORDER® 9000 USER GUIDE
Manual Offload
Select the Manual Offload option to manually offload recorded
video to a USB flash drive inserted into the NVR.
Press the center navigation key to select 'To USB'. Enter the
required password using the navigation keys.
Select either Event to offload event recorded files, or
Continuous to offload continuously recorded files.
Remove SSD
Select the Remove SSD option to remove the hard drive.
Enter the required password using the navigation keys.
Wait for the "Insert Storage Media" prompt to appear BEFORE
removing the hard drive.
Help
Select the Help option to display a help message regarding
manual offloads.
10
Advertisement
Table of Contents
