Table of Contents
Advertisement
25
(Audio / Video cont.)
Total Audio + Video Device(s): Click in the field and select the
number of cameras connected to the NVR.
Combine Event & Continuous: If enabled, Continuous
Recording and Event Recording will record on the same
stream, and the secondary stream will be used for Live Video
streaming.
•
Enable: This option is selected by default. To remove a
camera from the configuration list, uncheck the box.
•
No.: Camera number
•
Device Type / Name: The default camera name will be
displayed in the first field. Users can enter a unique name
for the camera, up to 15 characters max. In the second
field, select the camera model from the dropdown menu.
•
Recording Type: To disable a stream, uncheck the box.
•
Stream Type: Click in the field and select either 'Main'
(high resolution) or 'Sub' (low resolution) as the Stream Type
for each stream.
•
Codec: Click in the field and select the codec format for
each stream.
•
Resolution: Click in the field and select the resolution for
each stream.
•
FPS: Click in the field and select the frame rate for
each stream.
•
Bit Rate: Click in the field and select the bit rate for
each stream.
ROADRECORDER® 9000 USER GUIDE
Populate Settings: After completing all of the fields for
one camera, the same configuration can be copied to other
cameras of the same model type.
Click in the Select Camera field and select the camera you
want to copy. In the second multi-selection box, select the
camera(s) you want to copy the settings to, then click the
Populate button to apply the settings.
Click the Save and Configure button to save configurations.
•
Rotation: Click in the field to rotate the camera image
(if needed).
•
Audio: If audio is supported by the camera, audio will be
enabled by default. To disable audio, uncheck the box for
each stream.
•
Audio Codec: Click in the field and select the audio codec.
•
Snapshot: Select this option to enable the snapshot
feature.
NOTE: Codec must be set to MJPEG in order to enable
this option.
•
Time Display: Select this option to display a time stamp
on the camera's image.
•
NTP: Select this option to sync camera time to the NVR's
NTP server.
•
Static IP: Select this option to enter the camera's Static
IP Address.
•
Static IP Address: Enter the Static IP Address for the
camera.
Advertisement
Table of Contents
