Table of Contents
Advertisement
(Network Settings cont.)
POE 8 Network Interface
Select this option to enable PoE 8 as a separate network
interface
•
IP Address: Default IP address for PoE 8.
•
Netmask: Default Subnet mask for PoE 8.
•
Gateway: Default Gateway IP address for PoE 8.
LiveTrax
Select this option to enable LiveTrax. This option must be
enabled and configured in order to communicate with the
LiveTrax server.
LiveTrax account required.
•
Server IP address: Enter the IP address for the LiveTrax
server
(64.251.197.19)
•
Send Port: Default Send Port for the LiveTrax server
•
Receive Port: Default Receiver Port for the LiveTrax server.
•
Gateway: Gateway IP address only required if using
LiveTrax as the default gateway.
•
Netmask: Subnet mask only required if using LiveTrax as
the default gateway.
SafetyNet Server Announce
Select this option to enable the SafetyNet Server Announce
feature. When enabled, NVR will ping the configured server
below.
ROADRECORDER® 9000 USER GUIDE
oMG Server
Select this option to enable communication with an oMG
Server.
Default Routing: Option to configure a default gateway. LAN 2
is selected by default.
Web Port: Default Web Port is 80.
Click Save Changes to save changed entries.
•
Server IP address: Enter the IP address for the server
hosting the SafetyNet software.
•
Server Port: Default server port.
•
Gateway: Gateway IP address only required if using
SafetyNet Server Announce as the default gateway.
•
Netmask: Subnet mask only required if using SafetyNet
Server Announce as the default gateway.
•
Announce IP address: Enter the IP address that will be
used to communicate with the SafetyNet software.
•
Server IP address: Default oMG Server IP address.
•
Server Port: Default server port for oMG Server.
18
Advertisement
Table of Contents
