Display options
Display
Selecting heating mode
Siemens
Building Technologies
Heating to Comfort setpoint
Heating to Reduced setpoint
Heating to frost protection setpoint
Process running – please wait
Change battery
Burner operating (only oil / gas boiler)
Display of all symbols and segments.
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxxxxxxxxxxxxxxxxxxxxxx
This setting is used to switch between the different
operating modes. The selection made is indicated by a
bar which appears below the respective symbol.
Automatic mode
Automatic mode controls the room temperature according to the time program.
Characteristics of automatic mode:
· Heating mode according to the time program
· Temperature setpoints according to the heating program "Comfort setpoint"
"Reduced setpoint"
· Protective functions active
· Automatic summer / winter changeover (ECO functions)
Continuous operation
Continuous operation maintains the room temperature at the selected operating level.
Heating to Comfort setpoint
Heating to Reduced setpoint
Characteristics of continuous operation:
· Heating mode with no time program
· Protective functions active
· Automatic summer / winter changeover (ECO functions) and 24-hour heating limit
inactive in the case of continuous operation with Comfort setpoint
User Manual
QAA75.. / QAA78... / AVS37..
or
Info level activated
Programming activated
Heating temporarily switched
off
ECO function active
Holiday function active
Reference to heating circuit
Maintenance / special
operation
Error messages
CE1U2353en
2014-07-30
or
33/138