Thermostat Display Overview - Siemens RDS110 User Manual

Getting started with your thermostat
4

Thermostat display overview

4.2 Thermostat display overview
Normal display
14 | 54
Siemens
Building Technologies
1 Tap to display detailed information and additional settings.
2 Displays whether the system is in an energy-optimized mode. If the leaf is
red, predefined settings were changed. Tap the red leaf to restore the settings were changed. Tap the red leaf to restore the
energy-saving mode. The leaf again turns green.
3 Room temperature.
4 Tap to toggle between At home and Away.
5
Displays whether the thermostat is following a scheduler (
your setpoint changes permanently (
the following:
● If there is network connection and you've also set your scheduler, the If there is network connection and you've also set your scheduler, the
thermostat follows your scheduler. Your temporary change of the thermostat follows your scheduler. Your temporary change of the
temperature setpoint only takes effect during the currently scheduled
mode.
● If there is network connection but you haven't set a scheduler, the If there is network connection but you haven't set a scheduler, the
thermostat follows the default scheduler set by the system. For more thermostat follows the default scheduler set by the system. For more
information about the default scheduler, see Setting schedulers [
● If there is no network connection or valid time, the thermostat cannot If there is no network connection or valid time, the thermostat cannot
retrieve scheduler information from the Cloud. It always works under the retrieve scheduler information from the Cloud. It always works under the
Comfort mode.
6 Tap or slide to change the room temperature setpoint.
optimized mode. If the leaf is
) or following ) or following
). Following a scheduler can mean ). Following a scheduler can mean
the currently scheduled
Setting schedulers
A6V10877569_en--_a A6V10877569_en
[| 45].
2017-09-08