Operating elements
Display options
Display
Selecting heating mode
Siemens
Building Technologies
5.3 QAA55..
5.3.1
Operation
Heating / cooling to Comfort setpoint
Heating to Reduced setpoint
Display of all displayable symbols and
segments.
This setting is used to switch between the different
operating modes. The selection made is indicated by a
bar which appears below the respective symbol.
Automatic mode
Automatic mode controls the room temperature according to the time program.
Characteristics of automatic mode:
-
Heating mode according to the time program
-
Temperature setpoints according to the heating program "Comfort setpoint"
"Reduced setpoint"
-
Protective functions active
-
Automatic summer / winter changeover (ECO functions)
User Manual
QAA55..
Selecting the operating mode
Adjustment of room Comfort
setpoint
Occupancy button
Burner operating (only oil / gas boiler)
Error messages
Example of basic display:
or
59/138
CE1U2353en
2014-07-30