Programming; Setting Principle; Example: "Setting The Time Of Day - Siemens Albatros RVS46 Series User Manual

Setting principle

Example: "Setting the time of day"

Siemens
Building Technologies
5.1.2

Programming

Settings that cannot be made directly with the operating elements require
programming. For this purpose, the individual settings are structured in the form of
operating pages and operating lines, thus forming practical groups of settings.
The following example shows how to set the time of day and the date.
· Press ESC to go one step back at a time, readjusted values are not be adopted
· If no setting is made for 8 minutes, the display returns automatically to the basic
display
· Operating lines may be hidden, depending on the type of controller, the configuration
made and the user level
Operation Display example
1
Room temperature
0
2
Time of day and date
Text3
Operator section
0
3
Time of day and date
Hours / minutes
0
4
Time of day and date
Hours / minutes
0
User Manual
QAA75.. / QAA78... / AVS37..
Description
Basic display.
AUTO
If the basic display is not shown, press
the ESC button to return to it.
Press OK.
4 8 12 16 20 24
The bottom section of the display
AUTO
shows a number of operating pages.
Turn the setting knob until operating
page Time of day and date appears.
Press OK to confirm.
4 8 12 16 20 24
In the bottom section of the display, the
AUTO
first operating line of operating page
Time of day and date appears.
Turn the setting knob until operating
line Hours / minutes appears.
4 8 12 16 20 24
To confirm, press OK.
The display shows the hours flashing.
AUTO
Turn the setting knob until the hours of
the time of day are correct.
To confirm, press OK.
4 8 12 16 20 24
37/138
CE1U2353en
2014-07-30