Room Unit Qaa55; Planning; Mounting Method; Connections - Siemens Albatros RVS46 Series User Manual

Planning

Mounting method

Connections

Dimensions and drilling plan

Siemens
Building Technologies

3.6 Room unit QAA55...

The room unit should be located in the main living room while giving consideration to
the following points:
· The place of installation should be chosen so that the sensor can capture the room
temperature as accurately as possible without getting adversely affected by direct
solar radiation or other heat or refrigeration sources (about 1.5 meters above the
floor)
· In the case of wall mounting, there must be sufficient clearance above the unit,
enabling it to be fitted and removed
When the unit is removed from its base, power is cut off so that the unit is out of
operation.
· The controller must not be exposed to dripping water
4 3
6 5 2 1
96
User Manual
Room unit QAA55...
@
CL+ BSB data
CL- BSB ground
56
60
4,2
2 1
21/138
CE1U2353en
2014-07-30