User Levels - Siemens Albatros RVS46 Series User Manual

Siemens
Building Technologies
4
+
5
6
5.2.2

User levels

The user levels only allow authorized user groups to make settings. To reach the
required user level, proceed as follows:
Operation Display example
1
2
3
User Manual
AVS37.390
The display shows the minutes
flashing.
1
Press the "+/-" button until the
minutes of the time of day are
correct.
Press OK to confirm.
The settings are saved and the
displays stops flashing.
1
Now, you can make further settings
or
You can press the operating mode
button to return to the basic display.
1
Now, you see the basic display
again.
Description
You see the basic display.
Press OK for 3 seconds.
Now, you are on the user level "End
user".
1
Press INFO for 3 seconds.
You are on the user level "Heating
engineer".
1
If the change to the "Heating
engineer" level was successful, the
display shows "ON" as a
confirmation.
57/138
CE1U2353en
2014-07-30