Using Diagnostics; Factory Set Password - Avery Dennison ADTP1 System Administrator Manual

U S I N G D I A G N O S T I C S
This chapter explains how to check supply quality and enable a password.
For a complete list of printer error message, refer to the Packet Reference Manual on our
Web site.
Option
Version
Supply Quality
Password
F a c t o r y S e t P a s s w o r d
A password is required to access the diagnostic functions.
Press Feed three times and then press Enter.
The Service Diagnostics menu can only be accessed by a Service Representative; it
requires a separate password.
Choices
Firmware/Serial Number/Board ID/W ireless/RFID 1/
RFID 2/ Easy Setup
NA
No/Yes
Classification: Avery Dennison – Public
1 0
Default
NA
NA
No

Using Diagnostics 10-1