Using Scripts; Initial Script Startup Procedures; Viewing Script Information - Avery Dennison ADTP1 System Administrator Manual

U S I N G S C R I P T S
This chapter explains how to load, enable, and delete scripts. You can also enable
status polling and immediate commands.
Using the Scripts menu requires custom software. Scripts can print data streams written
for other printers or define a lookup table. Contact us to create a custom script for your
printer.
You can limit access to this menu to prevent changes.
The script options are in the following table:
Option
Load Script
Enable Script
Script Info
Delete Script
Status Polling
Immediate Commands
I n i t i a l S c r i p t S t a r t u p P r o c e d u r e s
Before you can start using a script, check the following items:
Check to see if a script is already in the printer. See
♦
continue.
Format flash memory, if needed. See
♦
more information.
Download a script to the printer, if needed. See
♦
V i e w i n g S c r i p t I n f o r m a t i o n
You can view information about a loaded script.
Select
Script Info
If a script is already loaded, see
download a script, see
Choices
No/Yes
No/Yes
NA
No/Yes
Disable/Enable
Disable/Enable
To
View the information about the loaded script.
If a script is not loaded, you see "No script loaded."
If a script is loaded, you see the script name and version number.
"Enabling a
"Formatting Flash
Classification: Avery Dennison – Public
Default
No
No
NA
No
Disable
Disable
"Viewing Script
"Formatting Flash Memory" in Chapter 6 for
"Downloading a
Script," to continue. If you need to
Memory" in Chapter 6.
Information" to
Script" to continue.

Using Scripts 7-1

7