Setting Communications; Setting The Baud Rate - Avery Dennison ADTP1 System Administrator Manual

S E T T I N G C O M M U N I C A T I O N S
This chapter tells you how to set the serial and USB communication values. These
values provide the link for normal online printing.
You need to set your Serial Comm values to match your computer's online
communications.
The serial communication values are in the table below.
Option
Baud rate
Word length
Stop bits
Parity
Flow control
Reset
The serial values on the printer must match those at the host.
S e t t i n g t h e B a u d R a t e
Baud rate is the speed, in bits per second, at which the printer sends and receives data.
Select To
1200 Communicate at 1200 bits per second.
2400 Communicate at 2400 bits per second.
4800 Communicate at 4800 bits per second.
9600 Communicate at 9600 bits per second.
19200 Communicate at 19200 bits per second.
38400 Communicate at 38400 bits per second.
57600 Communicate at 57600 bits per second.
115200 Communicate at 115200 bits per second.
Choices
1200/2400/4800/9600/19200/38400/
57600/115200
7/8
1/2
None/Odd/Even
None/Xon/Xoff/DTR/CTS
No/Yes
Classification: Avery Dennison – Public
Default
9600
8
1
None
DTR
No

Setting Communications 3-1

3